Choosing an air conditioner for an apartment does not seem like a difficult task at first glance. All devices cool rooms, and the main factor for many people is to stay within the budget. But, the air conditioner must perform its function well, so you need to at least accurately calculate its capacity. If you want to choose a quality air conditioner for an apartment and install it correctly, then it is best to use an air conditioning service in Sacramento from Alpha Mechanical.
What Type of Air Conditioner Is Best For an Apartment
Before choosing an air conditioner for an apartment, you need to decide which room it should cool. It will be right to choose an air conditioner based on the area of the room. It is also important to consider the height of the ceilings, the quality of the wiring, the age of the windows, as well as the repair.
If it is new, not everyone will want to damage the wall covering by running the wire from the indoor to the outdoor unit. The height of the ceilings and the density of the frames are important because air conditioners are designed to cool a certain area. If you choose the wrong device based on this parameter, it will be difficult to achieve the desired cooling temperature.
That is, choosing an air conditioner based on the area means analyzing a number of other parameters. Knowing them, it will be easier to determine which type of device is best suited.
Floor-Standing Air Conditioner
These models of air conditioners are placed on the floor. They are mobile, they can be moved from place to place, and in winter they can be put away in a closet. Special installation is not required, and there will be no problems with installing the air conditioner correctly. In addition, floor-standing cooling devices are cheaper than stationary ones.
These advantages have made floor-standing air conditioners very popular. But, of course, they have their drawbacks:
- Appearance. Budget models are likely to be not very attractive and can create serious visual noise in the room.
- Pipe. A floor-standing air conditioner must discharge hot air outside the room. For this, models are equipped with a wide metalized corrugated pipe. In addition to the pleasant aesthetic component, there is also a practical one: a pipe led out through an open window means that hot air from the street will constantly enter the room. In such a situation, it is difficult to achieve temperature balance, and the device will consume a lot of electricity.
- Noise. The noise from the operation of a floor-standing air conditioner reaches 60-70 decibels. On the noise rating scale, this is like a loud conversation heard at a distance of less than a meter.
- Limited functionality. Floor-standing air conditioners cool the air, but the heating function is only available in more expensive models.
Window Air Conditioner
A window air conditioner is a unit that is placed on a window (the part that removes hot air is outside, and the cooling part is inside the room). Models are considered low-power, they are noisy, but easy to install and are suitable for rooms up to 15 square meters.
Split System
A split system is the most popular type of air conditioner. It consists of two units, one is placed on the wall inside the room, the other outside. There is no air exchange between the external and internal units. Fresh air from the internal unit is also room air but cooled.
There are now models that can mix outside air into the internal room. But they are much more expensive, and they still cannot replace ventilation, because they suck in an insignificant amount of air from the street.
There is also a multi-split system. Its operating principle is the same as a regular one (hot and cold elements are on different sides of the wall, but the external unit is more powerful, and several internal ones are connected to it).
Multi-split systems are more expensive than several single ones. But there are situations when the buyer has no choice. For example, if you need to cool a room in a building in which external elements can only be placed in a strictly defined place.
Split systems are multifunctional compared to floor and window air conditioners. Even the most inexpensive models have a heating function. In the middle and premium segments, there is an energy-saving mode, a night mode, and a turbo mode (quickly cools or heats the air to the desired temperature).
Among the advantages of split systems is a low noise level during operation, because all the elements that make noise are located outside. Modern models work almost silently, with a barely audible rustle that will definitely not disturb your sleep.
Split systems are usually produced in light colors – closer to white, gray, and beige. But now there are also bright options that can be an accent in the interior of the room.
A long list of advantages of split models does not mean that they have no disadvantages at all. The main thing is the need for installation. Most often, to properly install an air conditioner in a private house or apartment, you need to invite a specialist. Usually, these same companies are engaged in the repair and maintenance of air conditioners. Thus, a reliable company in Sacramento that provides high-quality air conditioning services is Alpha-Mechanical.
Final Thoughts
Most often, people choose split systems based on the ratio of functionality, price, and aesthetics. But if you cannot violate the integrity of the wall, then you will have to choose from floor or window models. In addition, when choosing an air conditioner, you should consider the type of compressor. The inverter version is more powerful and works longer, but for regions with a short summer, it is not necessary. For proper installation of the air conditioner, it is best to contact specialists. Alpha-Mechanical provides high-quality air conditioning solutions in Sacramento.